Service
Cold Planing
Controlled removal of worn pavement so the new surface goes down at the right grade and stays there.
Overview
What this covers
Milling takes the failed surface off to a set depth without disturbing what is underneath. It is what lets an overlay match the existing grade at curbs, gutters, and structures instead of raising the whole road an inch and a half.
The same machines correct rutting, shoving, and cross slope that has gone flat over the years. Reclaimed material comes back to our plant rather than to a landfill.
What is included
- Depth controlled milling to a set profile
- Cross slope and grade correction
- Edge milling and butt joints at tie-ins
- Cutouts around manholes, valves, and inlets
- Removal of failed or delaminated pavement
- Reclaimed asphalt hauled back to our plant
- Sweeping and surface prep ahead of paving
Typical applications
- Overlay preparation on roadways and streets
- Rut and shove removal on high traffic lanes
- Clearance correction under bridges and canopies
- Parking lot resurfacing
- Airfield pavement rehabilitation
Gallery
What this looks like on site
Ready when you are.
Bid requests, material questions, or a look at a site. Call the office or send the details across.